:: Current_projects

PRODUCT:

A)Admixtures 

MIXMASTERS ADMX 517- C 
PRECAST ACCELERATOR CUM NORMAL PLASTIZICER
 
ADMX 517 C is based on MELAMINE. ADMX 517 C ideal for providing increased resistance to frost damage during and after construction of hollow blocks. Ideal for block making. Use of ADMX 517 C reduces the damage in transportation of Blocks. Gives additional frost protection by reducing the water content and accelerating hydration of cement. When added to Cementitous mixes it accelerates hydration and enables the water content to perform more efficiently. 

MIXMASTERS ADMX 517-
CMS ACCELERATOR CUM NORMAL PLASTIZICERS

ADMX 517 CMS is based on SMF and other additive. ADMX 517 CMS ideal for providing increased resistance to frost damage during and after construction of hollow blocks. Ideal for block making. Use of ADMX 517 CMS reduces the damage in transportation of Blocks. Gives additional frost protection by reducing the water content and accelerating hydration of cement. When added to Cementitous mixes it accelerates hydration and enables the water content to perform more efficiently. 

MIXMASTERS ADMX 517- S 
HIGH RANGE ACCELERATOR 

ADMX 517 S is based on SMF and other additive. ADMX 517 S ideal for providing increased resistance to frost damage during and after construction of hollow blocks. Ideal for block making. Use of ADMX 517 S reduces the damage in transportation of Blocks. Gives additional frost protection by reducing the water content and accelerating hydration of cement. When added to Cementitous mixes it accelerates hydration and enables the water content to perform more efficiently.

MIX ADMX I-LWP 501 INTEGRAL WATERPROOFING LIQUID

I-LWP 501 is a liquid admixture for concrete to achieve high resistance to water ingress. It is based on a blend of surface active agents and lignosulphonate.

B)Waterproofing

MIX FLEX ACRY - BOND Mix Flex 

Acry Bond is a specially formulated high build highly flexible aqueous, anionic dispersion of pure Acrylic styrene based milky white liquid which is used for as flexible waterproofing coatings and sealers. Meets Requirement of DIN 53479. 

USES: 

Mix Flex Acry Bond is a specially formulated high build highly flexible aqueous, anionic dispersion of pure Acrylic styrene based milky white liquid which is used for as flexible waterproofing coatings and sealers. Meets Requirement of DIN 53479. 
1) For waterproofing terraces, where high flexibility is required.
2) For arresting rising dampness.
3) For water proofing leakages from toilet units and sunk slabs.
4) For preventing penetration of chlorides into the concrete.
5) For making flexible waterproofing mortars
6) For waterproofing porous plaster surface

SURFACE PREPARATION:

Preparation of Surfaces to be treated is of utmost importance. The surface should be clean free from any bitumen, oil, grease and loose particles. All laitance and loose particles should be removed by wire brushing and all undulation and cracks should be filled with made good using Elasto build (Special) Repair systems. In case of badly honey combed surfaces give a layer of screed or plaster to make it worthy to receive the treatment. 

FEATURES: 

1. Designed for a broad range of applications.
2. Acrylic/ styrene based.
3. Highly flexible, excellent crack bridging capacity.
4. Plasticizer free.
5. Very good water resistance.
6. Good film formation.

DIRECTIONS FOR USE: 

1. Terrace water proofing
a) On the prepared terrace surface apply Coat.
b) The coats are to be applied at wet in wet.
2. Flexible repair mortar For various applications Mix latex z3 is used in the form of bonding slurry and as an additive in the modified Mortar.

PROPERTIES:

Color Milky White
Solids Content % 50
Ph 7 to 8.5
Viscosity at 23° C 140-200 mPas
Stabilization Non-Ionic
Ultimate Elongation 1600 %
Bactericide yes
Antifoam yes
Minimum film
Forming temperature <1 c

PACKING:

Mix Flex Acry Bond is supplied in Project Packing Also.

SHELF LIFE:

One year if kept sealed in original packing in cool and dry place.
________________________________________ 

MIX LATEX HZ3 – SBR – 510
MIX LATEX Z3 - is a water-Based Non-ionically stabilized Hydrolysis- Resistant dispersion of a Styrene Composite Carboxylated – Butadiene Co Polymer.
The dispersion is freeze-thaw Stable. It contains an antioxidant and is compatible with Most Hydraulic Blinders.
Applications: HZ3-LATEX is used for modification of hydraulic blinders in common application including repair mortar, flooring, Rendering, bonding, mineral sealing slurries and cement based adhesive. The dispersion is free from plasticizer and other additive which can migrate.
  
PROPERTIES: 

Appearance Milky White Pourable Liquid
Odor Faint aromatic
Emulsifying system Synthetic Anionic and Nonionic
Total Solids 50.0 ± 1.0 ISO 3251
PH 7 - 9.5 ± 0.5 ISO 976
Viscosity (Brookfield LVF,60 RPM)
CPS SP.1,12 RPM at 25 300 max
Specific Gravity 1.023 ± 0.005
Solubility in Water Insoluble but Miscible in all proportions

Advantages with Mix latex HZ3 – SBR
• Provides Excellent Water impermeability
• Offers good Workability at reduced water / Cement Ratio
• Improved Bonding and Adhesion to substrates
• Improved Toughness and flexibility
• Mixes can be applied in thinner sections
• Improved abrasion resistant flooring
Storage And Handling 

HZ3 – LATEX 

Must be Stored in Closed containersbetween 5 to 40 c And protected from frost and direct sunlight. Detailed Information is available on request. Information on environmental and hazard data may be taken From the material safety data sheet. HZ3 – is not classified as dangerous according to EC DIRECTIVE. 

FEATURES: 

1. Designed for a broad range of applications.
2. Acrylic/ styrene based.
3. Highly flexible, excellent crack bridging capacity.
4. Plasticizer free.
5. Very good water resistance.
6. Good film formation.

DIRECTIONS FOR USE:

1. Terrace water proofing
a) On the prepared terrace surface apply Coat.
b) The coats are to be applied at wet in wet.
2. Flexible repair mortar For various applications Mix latex z3 is used in the form of bonding slurry and as an additive in the modified Mortar.

PACKING:

Mix Flex Acry Bond is supplied in Project Packing Also.

SHELF LIFE: 

One year if kept sealed in original packing in cool and dry place.

C)Building Repairs

MIX FLEX ACRY - BOND

Mix Flex Acry Bond is a specially formulated high build highly flexible aqueous, anionic dispersion of pure Acrylic styrene based milky white liquid which is used for as flexible waterproofing coatings and sealers. Meets Requirement of DIN 53479.

MIX LATEX HZ3 – SBR – 510

MIX LATEX Z3 - is a water-Based Non-ionically stabilized Hydrolysis- Resistant dispersion of a Styrene Composite Carboxylated – Butadiene Co Polymer. The dispersion is freeze-thaw Stable. It contains an antioxidant and is compatible with Most Hydraulic Blinders.

Mix LATEX Z3 – SBR

MIX LATEX Z3 - is a water-Based Non-ionically stabilized Hydrolysis- Resistant dispersion of a Styrene Composite Carboxylated – Butadiene Co Polymer. The dispersion is freeze-thaw Stable. It contains an antioxidant and is compatible with Most Hydraulic Blinders. 

MIX COAT - 80

Safe Coat for Reinforcement MIX COAT 80 is a two pack anti-corrosive protective coating for structural steel and reinforcement. 

D)Grouts

No Content 

E)Tile Adhesive & Grout

No Content

F)Heat Resistant Coating

No Content 

G)Decorative Coating

MIX COAT 49 – MIX COAT is specialized acrylic co-polymer based water repellent coating suitable for waterproofing applications on pores surfaces especially for terra cotta roof tiles. The Micro particles of mix coat penetrate through the voids and seals the pores in applied surface and making it water tight apart from providing a glossy finish. Prevents Growth of fungi, algae , Micro- Organisms.

• Enhanced Water Repellent
• Prevents surface damage from tank and frost attack
• Easily Applicable by brush , roller or spray
• Prevents Surface from the attack of salty and acidified atmosphere.
• High Abrasion Resistant
• Resistant to UV rays & Whether
• Acid Resistance
• Clear Coat with Glossy Finish

Technical Info:

Form Semi viscous fluid
Colour White / Shade
Odour Characteristic
Required coats 2 Coats
Initial dry time 30 min
Final Dry time 48 hrs
Film Thickness 40 Microns – 2 coats



                    Copyright © 2016 - Mix Master Construction Chemicals - All Rights Reserved
visit Counter
web page counter



Developed by ArcherWebSol